Impact of the post-thermal annealing on OFETs using printed contacts, printed organic gate insulator and evaporated C-60 active layer - Université de Rennes Accéder directement au contenu
Article Dans Une Revue Solid-State Electronics Année : 2018

Impact of the post-thermal annealing on OFETs using printed contacts, printed organic gate insulator and evaporated C-60 active layer

Résumé

Towards fully printed organic electronics, bottom-gate, bottom contacts fullerene based organic FETs (OFETs) are fabricated using inkjet printing drop-on-demand technology for the deposition of gate contact, organic gate insulator and source and drain contacts. The last layer of this structure that is the semiconducting fullerene C-60 film is deposited by thermal evaporation at ambient temperature. Using physical and electrical analysis, the electrical performances are optimized by studying the effect of the thickness of the C-60 film and of the post-thermal annealing of the OFET. A quantitative relationship between the crystalline structure of the C-60 semiconducting layer (grain size and surface roughness) and the electrical performance of the OFETs is demonstrated. The best performance as determined from the values of the electrical parameters of the OFETs is obtained for 90 nm thick C-60 film and after an annealing of the OFET at 200 degrees C. The answer of present nearly fully printed OFETs to a voltage pulse applied to the gate leads to a switching time of 13 ms, and then to application frequency of some 10 Hz. This result opens the way to potential main application in electronic circuits for the treatment of analog signals coming from the human body activities.
Fichier principal
Vignette du fichier
Tao et al_2018_Impact of the post-thermal annealing on OFETs_accepted mansucript.pdf (1.27 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01935110 , version 1 (07-12-2018)

Identifiants

Citer

Zhi Tao, Tayeb Mohammed-Brahim, Wei Lei, Maxime Harnois, Emmanuel Jacques. Impact of the post-thermal annealing on OFETs using printed contacts, printed organic gate insulator and evaporated C-60 active layer. Solid-State Electronics, 2018, 150, pp.51-59. ⟨10.1016/j.sse.2018.10.011⟩. ⟨hal-01935110⟩
97 Consultations
245 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More