Optimization of a rear system based on titanium nitride for a flexible CuInSe2 solar cell - Université de Rennes Accéder directement au contenu
Article Dans Une Revue Optik Année : 2020

Optimization of a rear system based on titanium nitride for a flexible CuInSe2 solar cell

Résumé

Flexible thin film solar cells represent the future. This study concentrates on making CuInSe2 based solar cells non rigid by depositing the rear molybdenum contact onto inox 316. In order to overcome the Inox316 disadvantages such as the metallic impurities diffusion and the surface roughness, a bi-layer TiN/Ti have been introduced between the Mo rear contact and Inox 316. Two techniques have been employed: spray pyrolysis for CuInSe2 and by cathodic magnetron sputtering for Mo/TiN/Ti. CuInSe2 layers deposited onto glass substrates present high crystallinity with (112) preferred orientation at 550 °C. However, these properties disappear for CuInSe2 on Inox316 with missing peak (112) and fall in the ratio Se/Cu from 1.9 to 1.1. According to EDS analysis, these results may be due to the Fe and Cu diffusion from Inox316 to CuInSe2 film, this is why the presence of TiN/Ti bi-layer improves the surface condition of Inox 316 and reduces Iron presence from 9.7 % to 1.9 % and Cr from 3.8 % to 0.5 %; this confirms its efficiency to improve the solar cell performance using Inox316 substrate.
Fichier principal
Vignette du fichier
Messaid et al-2020-Optimization of a rear system based on Titanium Nitride for a flexible CuInSe2.pdf (809.35 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-02499780 , version 1 (01-04-2020)

Identifiants

Citer

B.E. Messaid, C.L. Paven, R.Z. Talaighil, R. Benzerga, L.L. Gendre, et al.. Optimization of a rear system based on titanium nitride for a flexible CuInSe2 solar cell. Optik, 2020, 206, pp.164305. ⟨10.1016/j.ijleo.2020.164305⟩. ⟨hal-02499780⟩
71 Consultations
144 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More