Analysis of anisotropic model and the effect of friction coefficient in a stretch forming process applied to AA2024 thin sheet - Université de Rennes Accéder directement au contenu
Article Dans Une Revue Scientific Bulletin - "Politehnica" University of Bucharest. Series D, Mechanical engineering Année : 2017

Analysis of anisotropic model and the effect of friction coefficient in a stretch forming process applied to AA2024 thin sheet

Résumé

The deep drawing numerical simulation problem represents today an important interest for a sheet forming engineering design. This paper presents the results of Finite Elements Simulation of a stretch forming test based on the anisotropic mechanical behavior describing an AA2024 aluminum alloy. The numerical simulations applied to thin sheets are made using a Hill'48 anisotropic elasto-plastic model. The corresponding material coefficients are measured at 0°, 45° and 90° relative to the rolling direction to take into account the metallic sheet anisotropy. The samples cutting directions relative to the rolling one correspond to the above mentioned angles. Furthermore this study analyzes the effects of the Coulomb friction coefficient on the maximal principal stresses variation and on the obtained punch loads-displacement curves.
Fichier non déposé

Dates et versions

hal-01619379 , version 1 (19-10-2017)

Identifiants

  • HAL Id : hal-01619379 , version 1

Citer

A. Tudor, A. Gavrus, S. Cananau, E. Pirva. Analysis of anisotropic model and the effect of friction coefficient in a stretch forming process applied to AA2024 thin sheet. Scientific Bulletin - "Politehnica" University of Bucharest. Series D, Mechanical engineering, 2017, 79 (1), pp.185-196. ⟨hal-01619379⟩
77 Consultations
0 Téléchargements

Partager

Gmail Facebook X LinkedIn More