Restrained shrinkage and cracking tendency of Self- Compacting Concrete incorporating supplementary cementitious materials (SCMs) - Université de Rennes Accéder directement au contenu
Communication Dans Un Congrès Année : 2016

Restrained shrinkage and cracking tendency of Self- Compacting Concrete incorporating supplementary cementitious materials (SCMs)

Résumé

Les études expérimentales menées sur les constructions en béton autoplaçant (BAP) ont montré que le retrait de séchage est l'un des principaux paramètres responsables de leur fissuration. Le présent travail s'intéresse à l'étude de l'impact des additions minérales tel que le laitier de haut fourneau; les cendres volantes et le métakaolin sur le retrait empêché de béton autoplaçant (BAP). Quatre formulations de BAP avec un rapport constant eau sur liant (E/L=0,368) ont été réalisées. Trois formulations de BAP ont été fabriquées par l'usage de trois ciments industriels de norme européenne EN 197-1: CEM I 52.5N (ciment Portland), CEM III/A 52.5L (ciment au laitier) et CEM V 42.5N (ciment composé au laitier et les cendres volantes), une quatrième a été effectuée en remplaçant 15% de ciment Portland par du métakaolin. Sur la base des résultats obtenus, nous avons constaté qu'à long terme, le retrait empêché du BAP-CEM III est supérieur à celui du BAP à base de ciment portland et de CEM V. La substitution de 15% du ciment Portland par du métakaolin, a diminué le retrait, l'utilisation des additions minérales a de son coté, réduit les ouvertures de fissures d'au moins un facteur de 2. ABSTRACT. Experience studies the constructions of self-compacting concrete (SCC) show that the drying shrinkage is one of the major parameters responsible for their cracking. This paper investigated the impact of the supplementary cementitious materials (SCMs) such as high blast-furnace slag; fly ash and metakaolin on restrained shrinkage of self-compacting concrete (SCC). Four SCCs mixtures were performed using a constant water-to-binder ratio (w/b) of 0.368. Three SCCs mixtures were manufactured using three industrial cements according to European standard EN 197-1: CEM I 52.5N (Portland cement), CEM III/A 52.5L (slag cement) and CEM V 42.5N (blended cement containing slag and fly ash), another was performed by substituting 15% of Portland cement by metakaolin. Based on the findings of this study, the result analysis showed that, a long-term restrained shrinkage of SCC-CEM III is higher than Portland cement SCC and SCC-CEM V. The replacement of 15% of the Portland cement by metakaolin, decreases the free total shrinkage and also the use of SCMs (slag, metakaolin and fly ash) reduces the crack openings by at least a factor of 2. MOTS-CLÉS : béton autoplaçant, additions minérales, retrait empêché, fissuration.
Fichier principal
Vignette du fichier
MAT-BET.12.pdf (216.08 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01516771 , version 1 (02-05-2017)

Identifiants

  • HAL Id : hal-01516771 , version 1

Citer

Davood Niknezhad, Siham Kamali-Bernard. Restrained shrinkage and cracking tendency of Self- Compacting Concrete incorporating supplementary cementitious materials (SCMs). 34èmes Rencontres de l’AUGC, May 2016, Liège, Belgium. ⟨hal-01516771⟩
69 Consultations
185 Téléchargements

Partager

Gmail Facebook X LinkedIn More