Combined electrochemical treatment/biological process for the removal of a commercial herbicide solution, U46D - Université de Rennes Accéder directement au contenu
Article Dans Une Revue Separation and Purification Technology Année : 2014

Combined electrochemical treatment/biological process for the removal of a commercial herbicide solution, U46D

Résumé

The removal of a commercial solution of 2,4-D, U46D , was carried out by coupling an electrochemical oxidation and a biological process involving activated sludge. The similar electrochemical behavior of 2,4-D and U46D highlighted their oxidation around 1.6 V/SCE and the feasibility of an electrochemical pretreatment. It was based on a home-made flow cell involving bare graphite felt electrode. To propose a consistent mechanism for 2,4-D oxidation, the indirect determination of OH has been performed and the absence of radicals formation during 2,4-D electrolysis was confirmed. Consequently, the proposed pretreatment can be considered as a 'direct' electrochemical process instead of an advanced electrochemical oxidation process. The impact of the flow rate on the pretreatment showed that 3 mL min 1 was a good compromise between the pretreatment time and the electrolysis efficiency, since it led to an almost total degradation of the pollutant while its mineralization remained limited. At this flow rate and for 500 mg L 1 of 2,4-D, the energy cost was estimated at 5 kWh m 3. The biodegradability of U46D solution was not significantly modified after electrolysis, most likely due to the presence of dimethylamine salt in U46D . Owing to the significant BOD5/COD ratio measured, a biological treatment of the commercial U46D solution was however considered. The electrochemical pretreatment shortened the duration of the biodegradation. For non-pretreated U46D (100 mg L 1 2,4-D), mineralization remained limited until 6 days of culture (33.7% DOC removal), and total removal of the DOC was observed after 8 days. For pretreated U46D , 63.7% decrease until the fifth day of culture was observed but total mineralization was not reached at the end of culture (72.1%). An overall mineralization yield during the coupled process of 82.1% was therefore reached. The presence of refractory compounds generated during the electrochemical pretreatment in small concentration was therefore shown
Fichier principal
Vignette du fichier
1-s2.0-S1383586614003724-main.pdf (499.69 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01063510 , version 1 (08-10-2014)

Identifiants

Citer

Jean-Marie Fontmorin, J. Siguié, Florence Fourcade, Florence Geneste, Didier Floner, et al.. Combined electrochemical treatment/biological process for the removal of a commercial herbicide solution, U46D. Separation and Purification Technology, 2014, 132, pp.704-711. ⟨10.1016/j.seppur.2014.06.024⟩. ⟨hal-01063510⟩
145 Consultations
656 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More