Identifying soil compressibility from pressuremeter test - Université de Rennes Accéder directement au contenu
Communication Dans Un Congrès Année : 2004

Identifying soil compressibility from pressuremeter test

Résumé

Inverse analysis of pressuremeter tests has been widely used to identify the parameters of low permeability soils assuming the modified Cam-Clay model. In such a case, the simultaneous identification of two parameters (for instance, the consolidation pressure $p_{c0}$ and the critical state parameter M) can be achieved from a single pressuremeter curve obtained in fully drained conditions. Additional experimental information is therefore required to determine the others parameters of the constitutive model. This paper focuses especially on the determination of the plastic compressibility $β$ (where $β=λ−κ$) of prime importance in many engineering problems. Based on sensitivity studies, a procedure to identify simultaneously the plastic compressibility and the parameters $M$ and $p'_{c0}$ is proposed.
Fichier principal
Vignette du fichier
raniscV4.pdf (139.04 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01008284 , version 1 (29-04-2018)

Identifiants

  • HAL Id : hal-01008284 , version 1

Citer

Damien Rangeard, Christophe Dano, Philippe Marchina. Identifying soil compressibility from pressuremeter test. International Symposium on Numerical Models in Geomechanics (NUMOG IX), 2004, Ottawa, Canada. ⟨hal-01008284⟩
127 Consultations
238 Téléchargements

Partager

Gmail Facebook X LinkedIn More