Comparing the performances of bricks made with natural clay and clay activated by calcination and addition of sodium silicate - Université de Rennes Accéder directement au contenu
Article Dans Une Revue Applied Clay Science Année : 2011

Comparing the performances of bricks made with natural clay and clay activated by calcination and addition of sodium silicate

Résumé

The mix between 4 M to 12 M NaOH solution and aluminosilicate material forms a thick paste that can be compacted in a mold in order to manufacture bricks at relatively low temperatures (<100 °C). Starting materials available in Senegal consist of soils that primarily contain kaolin. In this study, we compare the performance of clay from the Niemenike deposit and clay pre-treated at 700 °C. The performance of the two clays depends on the temperature of curing and on the time of curing. In long-term tests (1 week to 3 months), for bricks kept at 40 °C/60% RH, strength did not increase with time for both clays (natural and calcined) activated with sodium hydroxide but this depends on the NaOH concentration. The maximum strength is obtained after 14 days for all concentrations. For all concentrations and periods, strength obtained with natural clay is greater. For short-term tests (6 h, 12 h, 24 h), with bricks kept at 120 °C/0% RH, the situation changed. The calcined clay gave the best mechanical performances. For all cases, long-term or short term, calcined or not, strength increased with concentration. The bricks produced in this fashion are durable and relatively inexpensive to make.

Dates et versions

hal-01005474 , version 1 (12-06-2014)

Identifiants

Citer

Mouhamadou Bassir Diop, Michael W. Grutzeck, Laurent Molez. Comparing the performances of bricks made with natural clay and clay activated by calcination and addition of sodium silicate. Applied Clay Science, 2011, 54 (2), pp.172-178. ⟨10.1016/j.clay.2011.08.005⟩. ⟨hal-01005474⟩
90 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More