High-pressure (GPa) impedance measurements based on an indentation-induced local stress field - Université de Rennes Accéder directement au contenu
Article Dans Une Revue Solid State Ionics Année : 2014

High-pressure (GPa) impedance measurements based on an indentation-induced local stress field

Résumé

Electrical measurements of conducting and dielectric materials under high pressures (in the order of GPa) reveal important information regarding orbital overlaps, electronic states, changes in transition temperatures, and activation volumes (Delta V). In this study, we demonstrate a new method for high-pressure impedance measurements, up to 4 GPa, utilizing an indentation-induced local stress field. The current system does not require any pressure mediums or pressure calibrations. The Delta V for O2- ion conduction in 10 mol\% Y2O3-doped zirconia at 500 degrees C was estimated to be 3.0 cm(3) mol(-1). Delta V increased with increasing temperatures from 500 to 600 degrees C. The technique also allows the concurrent determination of the effective elastic modulus by fitting the experimental data obtained from the indentation load-depth profile curve with the Hertzian elastic model. The experimental values were consistent with the theoretical values. (C) 2013 Elsevier B.V. All rights reserved.
Fichier non déposé

Dates et versions

hal-00990266 , version 1 (13-05-2014)

Identifiants

Citer

Yusuke Daiko, Eri Takahashi, Norio Hakiri, Hiroyuki Muto, Atsunori Matsuda, et al.. High-pressure (GPa) impedance measurements based on an indentation-induced local stress field. Solid State Ionics, 2014, 254, pp.6-10. ⟨10.1016/j.ssi.2013.10.038⟩. ⟨hal-00990266⟩
144 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More