Bi-Objective Sizing Optimization of a PM Machine Drive on an Operating Profile - Université de Rennes Accéder directement au contenu
Communication Dans Un Congrès Année : 2010

Bi-Objective Sizing Optimization of a PM Machine Drive on an Operating Profile

Résumé

This article sets forth a design optimization methodology for an SMPM machine drive on an operating profile. The optimization parameters serve to describe both the machine geometry and electrical ratings of the electronic power converter. Each operating point is treated independently, and current control is optimized at every operating point in order to not only minimize machine drive losses but also satisfy a number of constraints. This optimization methodology will then be applied to the design of a direct-drive conversion chain for a wave energy converter (WEC).
Fichier principal
Vignette du fichier
IEEE_SATIE_MachineSizing_ICEM-2010.pdf (825.26 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00516829 , version 1 (11-09-2010)

Identifiants

Citer

Judicael Aubry, Hamid Ben Ahmed, Bernard Multon. Bi-Objective Sizing Optimization of a PM Machine Drive on an Operating Profile. ICEM 2010, Sep 2010, Rome, Italy. pp.CD-ROM, ⟨10.1109/ICELMACH.2010.5608308⟩. ⟨hal-00516829⟩
179 Consultations
281 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More