Following the mechanisms of a single water droplet drying by means of photonic resonant structure - AUTomatic control Accéder directement au contenu
Communication Dans Un Congrès Année : 2019

Following the mechanisms of a single water droplet drying by means of photonic resonant structure

Résumé

We have designed and fabricated integrated photonic micro-resonators (MRs) devices in polymer UV210 on a SiO2 substrate. UV210 is a positive resin that features an absorption band in the deep-UV domain. Such a property allows us to perform photolithography at lower wavelength than the traditional i-line photolithography so as to design smaller and more precise structures. By using such MR as sensor, we have monitored the evaporation of a sessile water droplet by dynamically tracking its optical transduced signal. To do so, a broadband laser (λ = 790 nm, FWHM = 40 nm) is coupled to a set of MRs through the injection in a tapered access waveguide. The use of a broadband laser allows us to visualize several resonances on the same spectrum, which increases the precision of the data treatment. The water droplet is deposited on the MRs and the transduced signal is acquired during the whole drying process. The output optical signal is monitored by the mean of an optical spectrum analyser with a frequency of acquisition of about 1 Hz. The collected data are treated by a computation software, which aims at extracting the free spectral range (FSR) of the resonant mode present in the MR. The FSR is related to the opto-geometrical characteristics of the structure through the formula, which can be sliced in three zones (see Fig.1 (b)). Fig. 1 (a) Experimental plot of the free spectral range and the height of the droplet against time during the drying of a 10 µL sessile droplet at T = 24 °C. (b) Generic shape of the FSR and droplet height dynamics during a drying process. Zone I (resp. zone III) corresponds to the situation where the water (resp. the air) acts like a semi-infinite upper cladding for the resonator. Zone II corresponds to the approach of the air/water interface when it is close enough of the resonator to influence the optical mode. We can deduce that the steeper the slope, the quicker the evaporation over time. We have performed a set of experiments at various temperatures: 18°C, 24°C and 30°C in order to modify the speed of evaporation and correlate it to modifications in the FSR dynamics, and for several volumes of droplet: V = 5 µL, 10 µL, 20 µL and 40 µL. Moreover, the experimental set up also includes a camera for a direct visualisation of the drying process, which allows a direct measurement of the rate of evaporation. This global study successfully verifies the correlation between the FSR dynamics and the speed of evaporation.
Fichier principal
Vignette du fichier
CLEO-Europe_2019.pdf (664.63 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01993145 , version 1 (15-02-2019)
hal-01993145 , version 2 (05-06-2019)

Identifiants

  • HAL Id : hal-01993145 , version 2

Citer

Lucas Garnier, Hervé Lhermite, Véronique Vié, Hervé Cormerais, Octave Pin, et al.. Following the mechanisms of a single water droplet drying by means of photonic resonant structure. CLEO Europe - EQEC, Jun 2019, Munich, Germany. ⟨hal-01993145v2⟩
322 Consultations
146 Téléchargements

Partager

Gmail Facebook X LinkedIn More